Doosan 10/104 Скачать руководство пользователя страница 104 | Manualshive

Страница: 104 / 110

Doosan 10/104 Скачать руководство пользователя страница 104

100

OPTIONS

7/124 - 10/104, 10/124 - 14/114, 14/84

DESCRIPTION

Diesel Engine exhaust spark arrestors are a key safety feature for both
hazardous area and lower risk diesel engine applications where a stray
spark may cause ignition of combustible material. Virtually all
legislation regarding the operation of a diesel engine in a hazardous
area includes a mandatory requirement to fit a tested and approved
exhaust spark arrestor.

MAINTENANCE

Daily:

Examine the spark arrestor for any sign of gas leakage, cracks or
significant areas of damage, i.e. dents of more than a few millimetres
in depth.

Three Monthly:

Remove spark arrestor. Tap with a soft mallet to loosen any internal
deposits and shake out. Also by shaking check for any loose internal
baffles.

Six Monthly (or 1500 hours operation, whichever is sooner):

Examine the exhaust discharge in darkness whilst repeatedly loading
and accelerating the engine. If any sparks are observed, the spark
arrestor is not suitable for further use.

OPTION - SPARK ARRESTOR

T6361_00

WARNING: Ensure adequate ventilation if this check is carried
out in an enclosed area.

WARNING: The engine must not be put back into service until
any problems identified by the above checks are rectified.

«
...
102
103
104
105
106
...
»

Содержание 10/104















































































































Отзывы:

Нет отзывов