4
THERE IS A DANGER OF SCALDING. YOU MUST NEVER ATTEMPT TO
REMOVE THE SAFETY CAP WHILE THE STEAM CLEANER IS
SWITCHED ON OR UNDER PRESSURE. THE TOOLS AND HOSE WILL
GET HOT DURING USE. ALLOW THE TOOLS TO COOL DOWN
BEFORE CHANGING THEM WHILE THE STEAM CLEANER IS BEING
USED.
WARNING!
DO NOT OVERFILL THE TANK. USE ONLY 650ml WATER. NEVER PUT
DESCALING, AROMATIC, ALCOHOLIC OR DETERGENT PRODUCTS
INTO THE STEAM CLEANER, AS THIS MAY DAMAGE IT OR MAKE IT
UNSAFE FOR USE.
WARNING!
FILLING THE STEAM CLEANER WITH WATER
The steam cleaner tank has a capacity of 650ml.
Check that the steam cleaner is disconnected
from the mains supply.
Press the Locking Trigger Button until any
pressure has been released.
Unscrew the safety cap.
Check that there is no residual water in the
steam cleaner. Always empty the unit first to
ensure that only the correct measured volume
of water can then be added.
Make sure the steam cleaner is on a stable flat
surface.
Fill the measuring cup with water of 500ml
and
the tank with a maximum of 650ml.
It is not
necessary to use distilled water.
Using the funnel, pour the water into the steam
cleaner.
Screw the safety cap back onto the steam cleaner and tighten by hand.
