MAINTENANCE
There are no user servicable parts inside the steam cleaner.
Cleaning
After each use, empty any remaining water from the steam cleaner.
Rinse out the steam cleaner every month to eliminate any accumulated
calcium deposits. Make sure the steam cleaner is cold and disconnected
from the mains supply. Fill the steam cleaner with approximately half a
measuring jug of clean water. Screw the safety cap onto the steam cleaner
and tighten by hand. Shake the steam cleaner for a few seconds, remove
the safety cap and empty out the water into a container.
Wipe the body of the steam cleaner with a soft, dry cloth. Do not use any
abrasive cleaners.
Store the steam cleaner in a dry, cool place.
THE STEAM CLEANER MUST BE UNPLUGGED FROM THE MAINS
POWER SUPPLY AND ALLOWED TO COOL DOWN BEFORE ALL
CLEANING AND MAINTENANCE TASKS. ALWAYS UNSCREW THE
SAFETY CAP VERY CAREFULLY TO ENSURE THERE IS NO
PRESSURE INSIDE UNIT. WAIT AT LEAST 5 MINUTES FOR THE
STEAM CLEANER TO COOL, THEN CAREFULLY START TO
UNSCREW THE SAFETY CAP. IF YOU HEAR STEAM ESCAPING,
STOP AND WAIT UNTIL THE HISSING SOUND STOPS. CAREFULLY,
CONTINUE TO UNSCREW THE SAFETY CAP. IF YOU HEAR
STEAM ESCAPING AGAIN, STOP AND WAIT FOR THE HISSING TO
STOP. CONTINUE IN THIS MANNER UNTIL THE SAFETY CAP CAN
BE REMOVED. DO NOT IMMERSE THE STEAM CLEANER IN
WATER.
WARNING!
11
