DO9013W
4.Lift the kettle from the power base and then pour the water.
NOTE: operate carefully when pouring the water from your kettle,as boiling water
will scald.
5.The kettle will not re-boil until the switch is uplifted. Allow to cool for 15~20
seconds before reopening to boil water. The kettle may be stored on the power base
when not in use.
NOTE : Ensure power supply is turned off when kettle is not in use.
Should you accidentally allow the kettle to operate without water, the boil-dry
protection will automatically switch it off. If this should occur, allow the kettle to cool
before filling with cold water and re-boiling.
CARE AND CLEANING
Always disconnect the appliance from the power outlet before cleaning.
Never immerse the kettle area or cord in water, or allow moisture to contact with these
parts.
Removal of mineral deposits
mineral deposits in tap water may cause the kettle interior to discolor .To remove this
build-up ,use Liquid Descaler, a simple to use ,non-toxic cleaner.
Alternatively:
1.Fill the kettle with 3 cups of white vinegar and the remainder with water and be
allowed to stand overnight.
DO NOT BOIL
2.Empty the solution from the kettle .Any stains remaining inside the spout can be
removed by rubbing with a damp cloths, Fill the kettle with clean water, bring to boil
and then discard the water. Repeat and the kettle will then be ready to use.
The outside of the kettle can be wiped over with a damp cloth.
Cleaning appearance of housing
Wipe the appearance of housing with a wild and damp cloth or cleaner, never use a
poisonous cleaner.
CAUTION: Do not use chemical, steel, wooden or abrasive cleaners to clean the
outside of the kettle.
