Dometic STIIC, Инструкция по установке и эксплуатации, Страница: 3 / 24

3
EN
STIIC Controller General Information
1 .3 Supplemental Directives
To reduce the risk of accidents and injuries, please
observe the following directives before proceeding to
install or operate this appliance:
• Read and follow all safety information and
instructions.
• Read and understand these instructions before
installing or operating this product.
• The installation must comply with all applicable local
or national codes, including the latest edition of the
following standards:
U .S .A .
– American Boat and Yacht Council (ABYC)
– ANSI/NFPA70, National Electrical Code (NEC)
1 .4 General Safety Messages
WARNING: ELECTRICAL SHOCK, FIRE, AND/
OR EXPLOSION HAZARD . Failure to obey the
following warnings could result in death or
serious injury:
• Use only Dometic replacement parts and
components that are specifically approved for use
with the appliance.
• Avoid improper installation, adjustment, alterations,
service, or maintenance of the appliance. Service and
maintenance
must be done by a qualified service
person only.
• Do not modify this product in any way. Modification
can be extremely hazardous.
• Use care when diagnosing and/or adjusting
components on a powered unit.
2 General Information
The Dometic STIIC Programmable Logic Controller
(PLC) provides a plug and play networking solution
for Dometic products. The user-friendly software
connects a vessel’s Dometic devices and systems, like
air conditioning, water makers, ice makers, refrigeration
systems, and shipwide ventilation systems, to the
STIIC PLC. This technology allows the user to monitor,
manage, and troubleshoot the vessel’s marine comfort
systems from anywhere in the world, using a mobile
device or the Internet.
This is a MODBUS and CANBUS networked system.
The STIIC PLC is designed to work with unit controllers,
not to replace them. While the STIIC PLC allows you
to monitor and perform basic actions for the devices
enabled in the system, any in-depth diagnostics must be
done through the individual device or system.
I The images used in this document are for reference
purposes only. Components and component
locations may vary according to specific product
models. Measurements may vary ±0.38 in.
(10 mm).