Dometic STIIC, Инструкция по установке и эксплуатации, Страница: 21 / 24

21
EN
STIIC Controller Alarms
8 Alarms
The STIIC PLC provides an alert if any device connected
to it has a fault.
8 .1 Using the Touchscreen to View
Alarms
The touchscreen program uses the flashing bell icon to
represent that there is a fault. This icon is found on the
Main screen and the status screens of any device.
53 Red Alarm Bell Icon
1. Tap the bell icon. The Active Alarms screen appears.
54 Active Alarms Screen
2. Perform one of the following actions:
– View the active alarm names and descriptions.
– Tap RESET ALARMS to clear the active alarm log
once the alarm is resolved.
– Tap the clock icon to view the alarm history
screen.
The Historical Alarms screen displays all recorded
alarms.
55 Historical Alarms Screen
Perform one of the following actions:
– Use the drop-down menu to change the time
interval for the alarm history displayed.
– Select
Back
or
Forward
to move between the
pages of history
To access the alarms screen when the system is not in a
fault state:
1. Select STIIC Config from the Main screen.
2. Tap the white bell next to Home .
56 STIIC Configuration Screen
8 .2 Using the LCD Display to View
Alarms
Separate actions are needed to view general alarms and
Room Control alarms using the LCD display.
To view general alarms:
1. On the Main screen, press Program to enter the
Main menu.