Dometic STIIC, Инструкция по установке и эксплуатации, Страница: 18 / 24

18
EN
Operation STIIC Controller
43 Keypad
2. Enter the desired setpoint value.
3. Tap OK .
The STIIC PLC records a log of the temperature inside
each KRA box. Select the Trend icon to open the trend
graph.
44
KRA Trend Graph Screen
Perform one of the following actions:
• Select an option on the drop-down menu to change
the interval of data.
• Use the left or right arrows to change the date or
time.
• Save the logged temperature data to a USB drive:
a. Plug a USB drive into the touchscreen.
b. Tap the USB icon.
The system saves the logged data.
7 .4 Managing an Eskimo Ice Device
This section describes how to manage an Eskimo Ice
machine. There is a maximum of three Eskimo Ice
machines that can be viewed on the STIIC PLC.
To access the Eskimo Ice controls from the Main screen,
tap
ESKIMO ICE
.
45 Eskimo Ice Main Screen
The main Eskimo Ice screen appears listing the available
Eskimo Ice machines. Select the machine you want to
view.
Perform one of the following actions:
• Turn the machine on or off.
• View the machine status (Full or Filling) while running.
• View the voltage to the ice machine.
• View the current going to the compressor and auger.
• Tap the trend icon next to the current or voltage lines
to view trend data.
To manually adjust the setpoint
1. Tap on the rectangle next to the setpoint.
A keypad appears.
2. Enter the desired setpoint value.
3. Tap OK.
7 .5 Managing a FAMU or SWV
Device
This section describes how to manage a FAMU or SWV
control device that has been enabled on the system.