Dometic STIIC, Инструкция по установке и эксплуатации, Страница: 19 / 24

19
EN
STIIC Controller Operation
7 .5 .1 Using the FAMU Control
To access the FAMU control from the Main screen, tap
FAMU & SWV and tap FRESH AIR MAKE-UP .
46 FAMU or SWV Main Screen
The FAMU Main screen displays. There are three options
available: Normal Mode, Technician Mode, and Factory
Settings.
47 FAMU Main Screen
Perform one of the following actions in Normal Mode:
• Turn the machine on or off.
• Monitor the humidity levels.
• Monitor the temperature values.
• View the fan speed and the blower speed percentage.
The technician mode and factory settings options allow a
technician to modify the parameters of the system. These
options require a password to access. Only Dometic
approved technicians can access these options.
7 .5 .2 Using the Shipwide Ventilation
Controls
To access the SWV controls from the Main screen, tap
FAMU & SWV and tap SHIPWIDE VENTILATION .
48 Shipwide Ventilation Main Screen
The Shipwide Ventilation Main screen displays. Perform
one of the following actions:
• Place the system in Auto or Manual mode.
• Stop the system.
• View the system status.
• View the intake and exhaust fan speeds.
• View the temperature and pressure levels.
• Control the fan speed or place it in reverse mode
(Manual mode only).
7 .6 Managing a Reverse Osmosis
Device
This section describes how to manage an XTC
SeaXchange water maker, ZTC SpotZero freshwater
maker, or combination XZ Series device that is enabled
on the system.
7 .6 .1 Using the XTC SeaXchange Control
To access the SeaXchange control from the Main screen,
tap REVERSE OSMOSIS and tap Sea X Change .