Dometic STIIC, Инструкция по установке и эксплуатации, Страница: 13 / 24

13
EN
STIIC Controller Installation and Setup
17 KRA Device Naming Screen
7. Use the KRA ID drop-down menu to select a name for
the KRA box.
18 KRA Box Naming Drop-Down Menu
8. Repeat steps 1–7 for each room control and KRA.
6 .3 .4 Using the Touchscreen for Setting
up the Remote Support VNC Viewer
The remote support screen allows you to set up the STIIC
PLC to be accessed by Dometic technical support.
To display the Remote Support screen from the Main
screen:
1. On the Main screen, tap STIIC CONFIGURATION .
The STIIC Configuration screen appears.
2. Tap the red phone icon next to Enable Remote
Support .
19 STIIC Configuration Screen
The MobileVNC Settings dialog box appears.
20 MobileVNC Settings Dialog Box
3. Tap the Control tab.
4. Tap Start to enable remote access.
5. Note the IP address next to the pGD TOUCH IP for
use on the VNC Viewer app.
6. To end remote access, select Stop on the Control
tab.
6 .3 .5 Using the LCD Display to Enable/
Disable Devices
1. From the Main screen, press Program.
21 LCD Display Main Screen