EN
RM122, RM123
Installing the refrigerator
17
➤
Seal the hole with non-flammable sealant (fig.
a
1, page 5).
➤
Fix the cover plate with four screws on the outer wall of the vehicle
(fig.
9
3, page 5).
7.6
Installing cover plate above the refrigerator door
➤
Screw a block of wood on each side with the dimensions 25 x 66 mm on
both sides of the recess.
➤
Mount the blocks 16 mm offset inwards, so that the cover plate flush with
the front of the kitchen furniture (fig.
8
2, page 5).
➤
Screw the cover plate on the blocks.
7.7
Reversing the door hinge
A
The refrigerator is delivered with the door hinge on the right. This is how to
reverse the door hinge:
➤
Turn the refrigerator on the side.
➤
Pull the knob of the temperature switch.
➤
Loosen the two screws and remove the lower cover plate.
➤
Remove the top hinge leaf and the closure plate.
➤
Hold the upper hinge leaf and the closure plate to the desired side and at-
tach it to the lower hinge leaf from the opposite side.
➤
Install the vent grille with the two screws.
➤
Press the knob of the temperature switch to the spindle so that it is fixed
in the recess.
➤
Wait a few hours before starting the refrigerator.
NOTICE! Risk of damage
Lay the refrigerator on the side only, never on the backside.
Otherwise the aggregate may be damaged.
Содержание RM122
