EN
Using the refrigerator
RM122, RM123
20
The refrigerator must be lockable separately by means of a shut-off device in
the gas connection. The shut-off device shall be easily accessible.
➤
Connect the refrigerator to a gas source as shown in fig.
e
, page 7.
Use a cutting ring coupling according to EN 1949, firm and off circuit.
A hose connection is not permitted.
➤
Check all connections with leak spray. There are no leaks if no bubbles
form.
9
Using the refrigerator
!
A
I
9.1
Switching on the refrigerator
Gas operation (RM122)
➤
Open the refrigerator door. In the sight glass (fig.
2
4, page 3), you can
see if the flame is burning.
➤
Make sure that the gas supply is turned on.
➤
Turn the temperature regulator (fig.
f
2, page 7) to position “3”.
➤
Push in the temperature regulator and keep it pressed until the burner has
ignited.
CAUTION! Health hazard!
If you wish to cool medicines, please check if the cooling capacity
of the appliance is suitable for the medicine in question.
NOTICE!
Only put items in the refrigerator which can be kept at the se-
lected temperature.
Food may only be stored in its original packaging or in suitable
containers.
NOTE
Before using the appliance for the first time, clean it inside and
out with a damp cloth for hygienic reasons.
The cooling performance can be affected by:
– The ambient temperature
– The amount of food to be conserved
– How often you open the door
Содержание RM122
