2
INTRODUCTION
The Power Awning Pro system (hereinafter referred to as “unit” or “Product”) is designed and intended for installation in a Rec-
reational Vehicle (hereinafter referred to as “RV”) during or after the RV manufacture .
The Product kit is available for order with various components so while some graphics may show different components, they
still illustrate the correct procedure . All components that were not originally ordered can be purchased as an add-on or up-
grade .
Dometic Corporation reserves the right to modify appearances and specifications without notice.
IMPORTANT SAFETY INSTRUCTIONS AND DOCUMENT SYMBOLS
This manual has safety information and instructions to help you eliminate or reduce the risk of accidents and injuries .
A. Recognize Safety Information
This is the safety alert symbol . It is used to alert you to potential physical injury hazards . Obey all safety messages that
follow this symbol to avoid possible injury or death .
B. Understand Signal Words
A signal word will identify safety messages and property damage messages, and will indicate the degree or level of hazard
seriousness .
indicates a hazardous situation that, if
NOT
avoided, could result in death or serious injury .
indicates a hazardous situation that, if
NOT
avoided, could result in minor or moderate injury .
is used to address practices
NOT
related to physical injury .
C. Supplemental Directives
Read and follow all safety information and instructions to avoid possible injury or death .
Read and understand these instructions before [installation / use / service / maintenance] of this product .
Incorrect [installation / operation / service / maintenance] of this product can lead to serious injury .
The installation
MUST
comply with all applicable local or national codes, including the latest edition of the following stan-
dards:
U.S.A.
• ANSI/NFPA70, National Electrical Code (NEC)
• ANSI/NFPA 1192, Recreational Vehicles Code
CANADA
• CSA C22 .1, Parts l & ll, Canadian Electrical Code
• CSA Z240 RV Series, Recreational Vehicles
Indicates additional information that is not related to physical injury .
D. General Safety Messages
Failure to obey the following warnings could result in death or serious injury:
• This product
MUST
be [installed / serviced] by a qualified service technician.
• Do
NOT
modify this product in any way. Modification can be extremely hazardous.
• IMPACT OR CRUSH HAZARD . This product should be installed in a controlled environment (inside) . Do
NOT
install
product during windy conditions, or when wind is expected. Otherwise, product could move unpredictably, become un
-
stable, and could [detach / bend / collapse] .
Compatible
ONLY
with 9100 power awnings and associated hardware .
