Dometic HC302 Series, Инструкция по установке и эксплуатации

Страница: 14 / 76

EN
Installing and connecting the refrigerator
HC302, HC502
14
Key to fig. 2 , page 2
6 Installing and connecting the
refrigerator
6.1 Unpacking the refrigerator
➤
Check that the packaging in not damaged.
➤
Remove the cardboard packaging.
➤
Check that the refrigerator is not damaged.
If you find damage on the packaging or at the refrigerator resulting from
transport, report it immediately to the transportation firm.
6.2 Installing freestanding version
Observe the following instructions when installing:
 Install the refrigerator so that the warm air produced can easily flow away,
either upwards or to the sides.
 Leave the device to stand for at least four hours before you connect it
to the power supply so that the refrigerant can flow back into the
compressor.
➤ Place the refrigerator at the chosen place.
No. Explanation
1 Current inner temperature (in °C)
2 Minimum inner temperature (in °C)
3 Maximum inner temperature (in °C)
4 Reset button