Dometic CAM55, Инструкция по установке и эксплуатации

Страница: 15 / 216

EN
CAM55/55W Mounting the camera
15
8 Mounting the camera
8.1 Tools required
For installation and assembly you will require the following tools:
•
Drill bit set (fig.
1
1, page 2)
•
Drill (fig.
1
2, page 2)
•
Screwdriver (fig.
1
3, page 2)
•
Set of ring or open-ended spanners (fig.
1
4, page 2)
•
Measuring ruler (fig.
1
5, page 2)
•
Hammer (fig.
1
6, page 2)
•
Centre punch (fig.
1
7, page 2)
To make and test the electrical connection , the following tools are required:
•
Diode test lamp (fig.
1
8, page 2) or voltmeter (fig.
1
9, page 2)
•
Insulating tape (fig.
1
11, page 2)
•
Cable bushing sleeves, if necessary
To fasten the cables you may require additional cable binders.
8.2 Mounting the camera
!
I
CAUTION!
Select a location for the camera and attach it so securely that it cannot
under any circumstances fall off and injure bystanders (e.g. by being
knocked off by branches brushing over the roof of the vehicle).
NOTE
If installing the camera alters the vehicle height or length specified in the
vehicle documents, your vehicle must be inspected by the appropriate
authorities.
Make sure that you are in possession of documents verifying that your
vehicle has passed this inspection.
CAM55-IO-16s.book Seite 15 Mittwoch, 15. März 2017 10:53 10