Dometic CAM55, Инструкция по установке и эксплуатации

Страница: 17 / 216

EN
CAM55/55W Mounting the camera
17
If you want to screw on the camera with self-tapping screws
(fig.
b
, page 5)
A
➤
Drill Ø 2 mm holes at the points you have just marked.
➤
Deburr all drill holes and apply rust-protection.
➤
Screw on the camera bracket using 4 x 10 mm self-tapping screws.
If you would like to attach the camera with threaded screws fitted through
the construction (fig.
c
, page 5)
A
➤
Drill Ø 6.5 mm holes at the points you have just marked.
➤
Deburr all drill holes and apply rust-protection.
➤
Screw on the camera bracket using M6 x 20 mm threaded screws.
Depending on the thickness of the construction, you may require longer
threaded screws.
Creating a through-hole for the camera connection cable
(fig.
d
, page 5)
I
A
➤
Drill a hole of Ø 16 mm near the camera.
NOTICE! Risk of damage!
The holder may only be attached to steel panels with a minimum
thickness of 1.5 mm using self-tapping screws.
NOTICE! Risk of damage!
Ensure that that nuts cannot be pulled through the body shell when they
are tightened.
Use larger washers or metal plates if necessary.
NOTE
If possible, use available openings – such as ventilation grilles – to feed
the connection cables through. If there are no existing openings, you
must drill a hole with a 16 mm diameter.
NOTICE! Risk of damage!
Ensure that there is sufficient space on the other side for the drill head to
come out
CAM55-IO-16s.book Seite 17 Mittwoch, 15. März 2017 10:53 10