Dometic 9500E Скачать руководство пользователя страница 9

Страница: 9 / 15

ADJUSTMENTS

A. Adjusting The Vibration Sensor

IMPACT OR CRUSH HAZARD. Keep your hands, arms, head, and torso clear of the awning hardware during periods of rain,

wind, etc. These conditions may cause the vibration sensor to unexpectedly activate and retract the awning. Failure to obey this warning

could result in death or serious injury.

Failure to obey the following notices could damage product or property:

• Do NOT rely on the vibration sensor to prevent damage to the awning. The awning should ALWAYS be closed when unattended or when

strong rain, wind, etc., is expected.

• Do NOT hang any items from, or block, the travel of the hardware arms or awning when the vibration sensor is installed.

STEP 1

Sensor Base

Sensor Cover

STEP 2

Sensor Dial

Sensor Cover

Vibration Sensor

• To adjust the sensitivity of the vibration sensor, turn the dial

to a setting between 1 (most sensitive) and 9 (least sensitive).
Settings 0 and 5 are for programming only.

After making adjustments, confirm that the vibration sensor is
functioning correctly. See the installation manual for
more details.

Содержание 9500E
















Результаты поиска

Содержание 9500E

Отзывы:

Похожие инструкции для 9500E

Бренды по названию

Популярные бренды

Dometic 9500E, Руководство по эксплуатации

Результаты поиска

Содержание 9500E

Отзывы:

Похожие инструкции для 9500E

Бренды по названию

Популярные бренды