Dometic 4443000399, Руководство по установке

Страница: 29 / 126

27
EN
Frigo DC Installing the transport refrigeration system
• Do not attach any cables, electrical wiring or hose lines to the hoses of the
brake system.
• Lay all hose lines and electrical wiring in such a way that they are free of
mechanical loads.
• Fasten the cable sets with cable binders and hose clips.
• Join the compact plug connections so that snap-in points are fixed.
• During the assembly of the watertight plug housing ensure that the rubber
seals for the cables and plug housing are present.
• In areas at high-risk of splashing (e.g. engine compartment, underbody), pro-
tect plug connections that are not watertight with an additional protective
wax spray, insulating tape or similar. Corrosion on the plug connections can
cause failure of the transport refrigeration system.
• Ensure that the subsequently fitted fuse box is installed outside of the areas
exposed to splashing. Maintain a distance of at least 30 mm from fluid cir-
cuits. A distance of 300 mm must be maintained between fuse boxes and
flammable liquids (fuel filter, tank etc.).
• Install the fuse box as close as possible to the battery.
• Do not connect any additional power consuming devices to the assigned
fuses.
• Do not attach any additional cables (e.g. insulation-displacement connector)
to the existing cable lines.
7.3 Checking installation conditions
A
➤
Check whether the vehicle is equipped with thermal insulation with a k-value
of 0.4 W (m²/K) for the loading area.
➤
Check the requirements of the vehicle owner for the use of an electrical refrig-
eration system, such as:
–
Calculation of the required refrigeration capacity
– Storage temperature of the food to be transported
– Number of door openings per hour
➤
Take suitable measures to prevent temperature changes that are too great
during loading and unloading, such as installing strip curtains on the loading
area doors or other openings.
NOTICE!
Ensure that the vehicle complies with the minimum requirements for the instal-
lation. Correct functioning of the electrical refrigeration system cannot be guar-
anteed in the event of non-observance or alterations.
Frigo_DC-I-West.book Seite 27 Montag, 19. November 2018 12:09 12