Dometic 4443000399, Руководство по установке

Страница: 27 / 126

25
EN
Frigo DC Installing the transport refrigeration system
7 Installing the transport refrigeration
system
7.1 Prerequisites for the installation
I
7.2 Installation instructions
D
!
!
NOTE
For installing the transport refrigeration system, the following conditions must
be met in the vehicle:
•
Battery capacity: at least 90 Ah
• Generator: at least 125 A
• Thermal insulation: at least k-value = 0.4 W/(m
2
K)
DANGER! Danger of fatal electric shock!
Before starting any installation work, disconnect the battery and make sure that
no voltage can be transferred to the electrical components. Danger of injury
due to live electrical components. When connecting the electrical compo-
nents, there is a risk of electric shock.
WARNING!
Improper interventions or fittings on and in the vehicle’s electrical system and
electronics system can lead to impairment of the functions. This can lead to the
failure of vehicle-mounted components or vehicle safety equipment and as a
result to accidents involving personal injury or damage to the vehicle.
CAUTION!
• The transport refrigeration system may only be installed by qualified per-
sonnel from a specialist company. The following information is intended for
technicians who are familiar with the guidelines and safety precautions to
be applied.
• Improper installation of the transport refrigeration system can result in irrep-
arable damage to the device and put the safety of the user at risk.
• The manufacturer assumes no liability for malfunctions and for the safety of
the transport refrigeration system, especially for injury and/or damage to
property, if the transport refrigeration system is not fitted in accordance
with this installation manual.
• Always wear the recommended protective clothing (e.g. protective gog-
gles, gloves).
Frigo_DC-I-West.book Seite 25 Montag, 19. November 2018 12:09 12