ET DC BLUE ADVANCED USER 2013.012.24.11.2016
4
www.et.co.za
6.
It is highly recommended that a set of safety infra-red beams be used in conjunction with this product. The safety beams must be installed in such a way that
the product is prevented from running when anything is in the path of the door or gate.
7.
Over and above the recommendation to use safety infra-red beams with this product it is mandatory to install and use a safety beam set when using the
automatic closing feature. It is recommended that a warning light be fitted to any automation system.
After Installation: It Is The Responsibility Of The Installer To Ensure The User:
1.
Is proficient in the use of the manual emergency release mechanism.
2.
Is issued with the documentation accompanying this product.
3.
Understands that the gate or door may not be operated out of clear sight.
4.
Ensures that children are kept clear of the gate or door area at all times, and that children do not play with the remote transmitters or any fixed trigger switches
linked to the system.
5.
Is instructed not to attempt to repair or adjust the automation system and to be aware of the danger of continuing to use the automation system in an unsafe
condition before a service provider attends to it.
6.
Is proficient in testing the unit’s safety obstruction sensing system.
7.
Is aware of what to check for with regards to wear and tear that may need to be attended to from time to time by the service provider.
8.
Is aware that a fatigued battery may not be disposed of in the general refuse and must be handed in at a battery merchant for safe disposal. Before removing
the battery from the system the household mains must be disconnected. In the case of the motor unit being removed and scrapped, the battery must be
removed first.
0011014.005
* Based on the assumption that the door is balanced correctly and moving freely.
TECHNICAL SPECIFICATIONS
Model
DC BLUE ADVANCED Pico
DC BLUE ADVANCED
Primary power supply
220 – 240Vac @ 50hz
220 – 240Vac @ 50hz
Peak power consumption
100W peak @ (220 -240vac)
120W peak @ (220 -240vac)
Motor voltage
24Vdc
24Vdc
Maximum operations per day*
50 full cycles per 24hrs @ a rate of Max. 5
per hour
50 full cycles per 24hrs @ a rate of Max. 5 per
hour
Traveller speed*
8m/min
8m/min
Operating temperature range -10 to 50° C (14F to 122F)
-10 to 50° C (14F to 122F)
Anti-crushing safety sensing
Yes - Electronic digital profiling
Yes - Electronic digital profiling
Auxiliary supply output
24Vdc @ 250mA peak or 150mA continuous 24Vdc @ 250mA peak or 150mA continuous
Rated battery charging voltage 27.5Vdc
27.5Vdc
Built in receiver format
ET BLU MIX © enhanced rolling code.
ET BLU MIX © enhanced rolling code.
Receiver frequency
433.92Mhz
433.92Mhz
Memory
EEPROM
EEPROM
Applicable door types
One piece trackless tip-up or multiple panel
sectional overhead single width doors
One piece trackless tip-up or multiple panel
sectional overhead double width doors
Drawbar options(Ex-stock)
2.2m or 3.2m
2.2m or 3.2m or 3.7m
Applicable door sizes*
<10m²
<15m²
