Domestic DC Blue Advanced, Инструкция пользователя

Страница: 14 / 16

ET DC BLUE ADVANCED USER 2013.012.24.11.2016
14
www.et.co.za
A QUICK METHOD OF LEARNING A TRANSMITTER BUTTON CODE INTO THE RECEIVER MEMORY WITHOUT ENTERING THE
PROGRAMMING MENU.
Max users (BT) button trigger channel = 35 user codes
NB!! No remote codes can be learnt into the (LT) courtesy light channel this way.
Action Response
Door must be closed Door closed
Press and hold the “Up”
button until buzzer beeps and
display shows “b”.
Buzzer beeps once and display
shows “b”
Press and hold required
remote button.
LED on remote transmitter
remains lit.
Press and release the “SET”
button.
“ 1 ” on display and 1 beep =
user code successfully
registered.
“ 2 ” on display and 2 beeps =
user code already in the
receiver memory.
“ 3 ” on display and 3 beeps =
Unsuccessful because no code
was seen within 4 sec of the
“SET” button being pressed.
Mandatory timeout.
“ F ” on display and multiple
rapid beeps = Memory full
Release both the remote
button and “SET” button
Display reverts back standby
mode “II”
Memory full
Code already in
memory
Successful
Unsuccessful