ET DC BLUE ADVANCED USER 2013.012.24.11.2016
16
www.et.co.za
WARRANTY:
1. All goods manufactured by ET NICE (Pty) Ltd carry a 12 month factory warranty from date of invoice.
2. All goods are warranted to be free of faulty components and manufacturing defects.
3. Faulty goods will be repaired or replaced at the sole discretion of ET NICE (Pty) Ltd free of charge within the warranty period.
4. This warranty is subject to the goods being returned to the premises of ET NICE (Pty) Ltd.
5. The carriage of goods is for the customer’s account.
6. This warranty is only valid if the correct installation and application of goods, as laid out in the applicable documentation
accompanying said goods, is adhered to.
7. All warranty claims must be accompanied by the original invoice.
8. All claims made by the end user must be directed to their respective service provider/installer.
The following conditions will disqualify this product from the warranty as laid out above. These conditions are non-negotiable.
1.
Any unauthorized non-manufacturer modifications to the product or components thereof.
2.
Any modification to the installation methods described in the installation instructions.
3.
Any application or use of the product other than the intended use and application described in the product documentation.
4.
Any application and or usage of this product outside of the technical specifications limits prescribed for it.
5.
Any use of the product where the due diligence prescribed in the “Be Safe” document is not adhered to.
In particular for this product:
•
The use of this product in heavy traffic applications such as office parks entrance/exits and residential complexes entrance/exits.
•
The use of this product in non-weatherproof applications such as car ports.
The following items are not included in the warranty or they carry a special warranty condition of their own.
1.
The battery (Limited 6 month warranty)
2.
The motor brushes.
3.
Damage resultant of wind and other climatic influences such as lightning strikes.
4.
Damage due to high voltage surges on the household mains.
5.
Damage due to infestation i.e. Ants nesting…
6.
Water damage. It is the responsibility of the installer to ensure the product is installed in a location that is protected from water
ingress. The ingress protection rating is specified in the accompanying documentation. Housings that require that cable entries are
made by the installer do not carry an ex-factory ingress protection rating as it is the responsibility of the installer to seal the cable
entry points after installation of the cabling.
