Domenor D8406, Инструкция по установке и эксплуатации

Страница: 17 / 43

5. 5. 3 Park action
5. 5. 4
、 【 】
【 】 【 】
【 】
【 】
【 】
【 】
【 】
【 】
【 】
【 】
【 】
【 】
【 】
【 】
【 】
【 】
【 】
Click the up and down button
lick the up and down button
lick the up and down button
NONE - (default)
PRESET -
SCAN -
PAT1 -
TOUR -
NONE -
AUTO -
PRESET -
SCAN -
PAT1 -
TOUR -
、
“ ”
、
“ ”
●
●
●
●
●
●
●
●
●
●
●
Power up action
This setting allows the dome to run an appointed action after it enters
vacancy for a few time (1-240minutes). If default sets as 0, it means
not to run this action.
1 , move the cursor to PARK TIME , click
the right button, c to set park time, the range is
0-240 (minute), click the right button to save.
PARK ACTOIN is running action at park time, when PARK TIME
sets as 0, this item can't be set.
2 Click the button, move the cursor to PARK ACTON , click the right but-
ton there will be a sign in the front of PARK ACTON , the cursor jump
to right, after c to choose park action there
are options for choosing as follow, click the right button to save.
none action
use preset 1
run scan
run pattern X
run tour
The dome starts to run actions after self-testing, if nobody intervenes
with it , the dome will repeatedly run this action continuously , if default
sets as NONE .
1 Click the button, move the cursor to POWER UP ACTION : click the
right button to jump to the following choice, tilt up/down joystick to
choose power up action , Click the up and down button to save.
run scan
run pattern X
run tour
，
none action
the dome resumes the primary action and
direction before power up.
use preset 1
5. 5. 5
【 】
O
O
C.
C.
Fan startup by temperature
The temperature of the dome will rise when its environment is in high
temperature. The fan will open automatically when the temperature reaches
to a temperature value in order to make sure the stability of the dome.
Click the button, move the cursor to FAN ENABLED : Click the right
button , the cursor will skip to the back option. The user can click the right but-
ton to save it in actual condition.
The default setting temperature of the fan startup is 40 The user
also can enter into the fan startup setting to adjust the temperature of fan
startup. As picture shows: the temperature range is 0-60
MOTION
AUTO FLIP ON
PROPORTION PAN ON
PARK TIME
005
PARK ACTION SCAN
AUTO
FAN ENABLED 040
BACK
EXIT
POWER UP ACTION
MOTION
AUTO FLIP ON
PROPORTION PAN ON
PARK TIME
005
PARK ACTION SCAN
FAN ENABLED 040
BACK
EXIT
POWER UP ACTION AUTO
MOTION
AUTO FLIP ON
PROPORTION PAN ON
PARK TIME
005
PARK ACTION SCAN
FAN ENABLED 040
BACK
EXIT
POWER UP ACTION AUTO
14
System setting