7. 2 Scan
Scan is that pre-set two points , then the camera repeatedly scan
between the two points at a stable speed, the same magnification and
pan . A dome only has one scan tour.
click menu to enter
scan
menu, as
the left picture shows.
Scan speed setting: click the up and down button to
SCAN SPEED
,
click the right button, then click the up and down button to adjust scan speed,
click the right button to save.
4
Left limit setting: click the up and down button to
SET LEFT LIMIT
,
click the right button, click the up and down button to choose objective im-
age, click the right button to save.
5
Edit scan label: click the up and down button, move the cursor to
EDI-
T SCAN LABEL
, click the right button to enter submenu
edit label
,
move the cursor to
LABEL
, the system will auto-set the label as AUTO
SCAN, click the right button to revise.
6
Run scan: Click the button to
RUN SCAN
, click the right button to
exit the menu, and it stars to run scan.
1.The system enters into the main menu by calling 95 preset or by calling
9 preset twice within 3 seconds.
SCAN SPEED
SET LEFT LIMIT
SET RIGHT LIMIT
RUN SCAN
CLEAR SCAN
EDIT SCAN LABEL
2
Define current scan number: click the up and down button ,move the cu-
rsor to
scan number
,click the right button ,then click the up and down
button to choose scan number, click the right button to save .the following
operations aim at the current scan number.
3
“
”
】
】
【
】
【
】
【
】
“
”
【
】
、
【
】
● 【
】
● 【
】
● 【
● 【
● 【
】
● 【
】
、
The label can set up to 16 characters, and doesn't need editing characters.
Clicking the right button continuously to jump over and using spacebar to
replace the deleted characters. When you finish to edit a character,
Clicking the right button to enter into the next editing character; when you
finish to edit the last character, clicking the right button to save. Clicking
the right button to exit.
Character of label is suitable for choosing as follow: 0-9
A-Z
:<>-. , space. The editing ways of other labels are the same as above.
、
、
1. left limit and right limit of scan can't be set the same point.
2.Under scan process, speed, magnification and tilt direction won't
change, if the speed, magnification and tilt direction of the two limits
are inconsistent, run scan is base on left limit.
EDIT SCAN LABEL
LABEL
AUTOSCAN
BACK
EXIT
：
SCAN
SCAN NUMBER
01
SCAN SPEED
50
SET LEFT LIMIT
SET RIGHT LIMIT
RUN SCAN
CLEAR SCAN
EDIT SCAN LABEL
BACK
EXIT
FUNCTION SETTING
PRESETS
SCAN
PATTERNS
TOUR
ZONES
TIME RUNNING
BACK
EXIT
27
Function instruction
MAIN MENU
SYSTEM SETTING
CAMERA SETTING
FUNCTION SETTING
WINDOW BLANKING
ALARMS
EXIT
