Digital Video Recorder User Manual
9
menu
→
record function
→
record configuration to set.
Notice
: There is at least one read-write hard disk in DVR.
Pic.3.2 Record configuration
Record configuration set the record plan for each channel.
【
Channel
】
:
Choose the corresponding channel number to set the channel. Choose “all” option to set all
channels.
【
Redundancy
】
:
Choose the redundancy function to make the recording files double backup. Double backup is
writing the video files in two hard disks. When you do the double backup, make sure that there are two hard
disks installed. One is read-write disk and the other is redundant disk.
【
Length
】
:
Set the time length of each video file.(default value is 60min).
【
Pre Record
】
:
Record 1-30 seconds before the action occurs.
【
Record Mode
】
:
Schedule, Manual or Stop.
【
Schedule
】：
Record according to the set record type (regular, detection and alarm) and time section.
【
Manual
】
:
After choosing manual button, the related channel will do the regular recording whatever the state of
current channel is.
【
Stop
】：
Click the stop button and the channel stops recording
【
Week
】
:
Set Monday to Sunday or full week to record
【
Period
】
:
Set the time section of regular recording, the recording will start only in the set range.
【
Recording type
】
:
Regular, detection or alarm.
【
Regular
】：
Perform the regular recording in the set time section. The video file type is “R”
【
Detect
】：
Trigger the “motion detect”, “video blind” or “video loss” signal. The above alarm function is set as
follows: when starting recording, the “detection recording” state is on. The video file type is “M”.
