Digital Video Recorder User Manual
16
【
DHCP Enable
】
:
Obtain IP address automatically (not suggested).
Notice:
DHCP server is preinstalled.
【
IP address
】
:
Set the IP address. Default: 192.168.1.10.
【
Subnet mask
】
:
Set the subnet mask code. Default: 255.255.255.0.
【
Gateway
】
:
Set the default gateway. Default: 192.168.1.1.
【
DNS setup
】
:
Domain Name Server. It translates the domain name into IP address. The IP address is offered
by network provider. The address must be set and reboot then it works.
【
Media port
】
:
Default: 34567.
【
HTTP port
】
:
Default: 80.
【
HS Download
】
:
HS Download
【
Transfer Policy
】
:
There are three strategies: self-adaption, image quality precedence and fluency precedence.
The code stream will adjust according to the setup. Self-adaption is the tradeoff between the image quality
precedence and fluency precedence. Fluency precedence and self-adaption are valid only when the assistant
code stream is turned on. Otherwise image quality precedence is valid.
Chapter 4-Network access settings and cloud technology introduction
4.1 LAN access settings
4.1.1. Network connection
1. Before the WEB operation, need to connect this device with the network.
2.Enter DVR “main menu”
”system”
“network” to set correct IP address, subnet mask ,DNS and gateway
port, default is ok (the IP segment of the device should be the same with that on PC computer, if disconnected,
please check device IP was successfully connected .)
4.1.2. Login
Step 1:
After connecting successfully, you can login to view.
Open a web browser input the IP address of the login device in the address bar. For example the
device IP address is 192.168.1.10; HTTP port is 80. Then input http://192.168.1.10 in the address bar
and connect. If HTTP port is not 80, such as 81, then need to add port when viewing, as:
http://192.168.1.10:81
If the PC connects the device at first time, when open system, the security warning will pop up whether to
accept the WEB control web, please choose to accept the user, the system will automatically identify the
installation. (If the system is prohibited to download, please confirm whether you have other prohibited controls to
download plug-ins, and reduce the IE security level, permit unsigned plug-in to operate. The following interface
will pop up after successfully connected.
