Digital Video Recorder User Manual
13
Pic.3.7 Motion Detect
【
Channel
】
:
Choose the set motion detect channel.
【
Enable
】
:
Tick enable means the motion detect function is on.
【
Sensitivity
】
:
Choose from the six levels (Lowest, Lower, Middle, High, Higher, Highest) to set the sensitivity.
Notice
: Only the motion detect under Hybrid mode/Full analog mode have can set the sensitivity,
and only the analog channel can set region.
【
Region
】
:
Clicks set and enter the setting area. The area is divided into PAL16X12. Red block is motion detect
defensive area, White block is unfenced area. You can set the area by mouse, drag the mouse and draw the area.
Default: all selected blocks are detection area.
Pic.3.8 Motion detect area setting
【
Period
】
:
Trigger the motion detect signal in the set time section. You can set according to week or set uniformly.
Each day is divided into four time sections. Means the setting is valid.
