![background image](http://html.mh-extra.com/html/dom/sigma-plus/sigma-plus_assembly-instructions-manual_2517561019.webp)
Sigma Plus
Assembly / Filling of cylinder body
17
Caution! Material defects caused by improper insertion of the follower! If
the follower is inserted too far/not far enough into the cylinder body the
compression springs might be damaged.
Note! When mounting type KL you must assemble the long side,first.
Fig. 5: Insert follower together with
loading knife into the cylinder body
6. Please insert the follower incl.
loading knife carefully into the cyl-
inder body to such an extent until
the front edge of the follower pro-
vides approx. flush fit with the in-
ternal body edge (base length 30
mm) or the retainer ring device (ex-
tended version).
Springs and pins overlap the boring in
the cylinder body a little.
180°
Fig. 6: Turning follower together with load-
ing knife
7. Please turn follower incl. knife to
such an extent until the mounting
is positioned over the borings in
the cylinder body.
Содержание Sigma Plus
Страница 1: ...EDV Nr 298061 0 gb 08 09 Rev D Assembly Instructions Key system Sigma Plus Profile 145 ...
Страница 2: ...Notes ...
Страница 4: ...Contents 2 WARRANTY 46 WORKSHEET 47 ...