CT100G Series Inverter
CHAPTER 3 OPERATION AND POWER ON EXPLAIN
- 25 -
On: communication run command reference
mode
ALM
Alarm LED
Off: no fault alarm
Blinking: fault alarm or automatic study
parameter
On: torque control
3.1.2 Code displaying zone
5-figure LED display can display the monitoring data such as the set frequency
and the output frequency and alarm codes.
3.1.3 Buttons
Table 3-2 Functions of buttons
Button
Name
Function
Program
ming/ Exit
key
Enter or exit the 1st level menu;
Return to the 1st level menu from the 2nd level menu;
Return to the 2nd level menu from the 3rd level menu.
Multi-func
tion key
Operate according to multi-function selection [2]
Run key
In the keypad run command reference mode, the key is
used for start control of the inverter.
After setting the parameter self-identification, the key is
used to start the inverter for parameter self-identification.
Enter key
After function group confirmation of the 1st level menu,
enter the 2nd level menu;
After function group confirmation of the 2nd level menu,
enter the 3rd level menu;
After function parameters setting confirmation of the 3rd
level menu, return to the 2nd level menu;
In password verification state, the password input is
completed.
Right-shift
key
Function group edit step[1] selection in the 1st/2nd level
menu;
Function parameters settings edit step selection in the
3rd level menu;
In stop parameter display status, running parameter
display status and fault display state, display parameters
selection;
Edit bit selection in password verification state.
Stop/Res
et key
In keypad run command reference mode, the key is used
for stop control of the inverter;
In other run command reference modes, the key is used