USER MANUAL
TCM 515Z – 2.4 GHZ IEEE 802.15.4 Transceiver
© 2017 EnOcean | www.enocean.com
F-710-017, V1.0
TCM 515Z User Manual | v1.6 | September 2017 | Page 10/46
2.4
ESP3 Interface
TCM 515Z provides a bi-directional UART interface for communicating with the external
host. The default baud rate of this interface is 57600 bps. If the TURBO pin is set to active
low then the baud rate is increased to 460.800 bps.
2.4.1
ESP3 Data Format
TCM 515Z communicate with external hosts using EnOcean Serial Protocol version 3 (ESP3)
with EnOcean 2.4 GHz IEEE 802.15.4 extensions.
Please consult the detailed ESP3 specification at
https://www.enocean.com/esp
.
2.4.2
Supported ESP3 Commands
TCM 515Z supports the following ESP3 commands:
Packet Type 0x10: IEEE 802.15.4 Raw Packet
Packet Type 0x11: IEEE 802.15.4 COMMAND
o
SET_CHANNEL
o
GET_CHANNEL
Packet Type 0x05: Common Command
o
CO_SET_BAUDRATE
o
CO_GET_FREQUENCY_INFO
o
CO_GET_STEPCODE
Please refer to Appendix C for a description of the supported commands.
