USER MANUAL
TCM 515Z – 2.4 GHZ IEEE 802.15.4 Transceiver
© 2017 EnOcean | www.enocean.com
F-710-017, V1.0
TCM 515Z User Manual | v1.6 | September 2017 | Page 27/46
6.2.1
FCC (United States) regulatory statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
6.2.2
FCC (United States) labeling requirements
This module is labeled with its own FCC ID number, and, if the FCC ID is not visible when
this module is installed inside another device, then the outside of this device into which the
module is installed must also display a label referring to this enclosed module.
This exterior label can use wording such as the following:
"Contains Transmitter Module FCC ID: SVZ-TCM515Z"
Or alternatively:
"Contains FCC ID: SVZ-TCM515Z"
Any similar wording that expresses the same meaning may be used. Figure 15 below shows
an example of such label.
Figure 15 – Label example
6.2.3
FCC (United States) RF exposure statement
This module must not be used within a separation distance of 20cm or less between the
user and/or bystander and the antenna and/or radiating element.
Calculation of e.i.r.p. (effective isotropic radiated power):
conducted output power:
2.9dBm
maximum gain of antenna:
5.0dBi
maximum e.i.r.p.:
7.9dBm
maximum e.i.r.p. in Watts:
0.00617W
Exception limit for conduted output power
(or e.i.r.p.), when distance >20cm:
1.31 x 10
-2
ƒ
0.6834
W (f in MHz)
Frequency:
2500MHz
Limit:
2.75W
Contains FCC ID: SVZ-TCM515Z
