IXH610 Users Guide
– Dolphin Interconnect Solutions
Page 13
DIP switch bank SW 2 – configuration
This DIP Switch is used to configure transparent and non-
transparent modes, set the SMBus address and select the
clock source.
DIP no Name
Description
ON
OFF
Default
1
Boot EEPROM
Select
Used to select
EEPROM 1 or 2 as
boot image.
Load configuration
from EEPROM 2
Factory default is
TRANSPARENT
Host mode
Load
configuration
from EEPROM 1
Factory default is
NTB mode
Off
2 and 3 SMBus address Sets the SMBus
address to which the
slave SMBus
interface responds.
Off
4
Not used
Off
5
Upstream edge
select
off
6
Upstream cable
select
Used to select clock
source and propagate
RESET
Adapter card drives
CREFCLK, CRST
on cable if adapter is
upstream.
Local clock
mode, no CRST
on cable
on
Note: Some DIP switch configuration options may be removed in the future versions. Please always consult the
user guide for details.
Picture 4: DIP Switch SW2 location
