IXH610 Users Guide
– Dolphin Interconnect Solutions
Page 11
Configuration and DIP-switches
The IXH610 has two banks of DIP switches. The locations of the DIP switches on the cards are shown as SW1
and SW2 on the figure 5 below. The Default factory setting is NTB configuration ( see Use case C - 2 Node
Configuration
– NTB Mode (Balanced) and Use case D - Switch configuration, All Dolphin Software using default
setting). The IXH610 will also support transparent use, upstream mode (see Use case A: Transparent IO).
The IXH610 has DIP-switches for setting special modes or operations. Please carefully read the documentation
before modifying any DIP-switch settings. Please carefully pay attention to ON and OFF positions written on the
DIP switch.
Illustration 6 : IXH610 overview
