IXH610 Users Guide
– Dolphin Interconnect Solutions
Page 7
Dolphin Express adapter card - IXH610
The IXH610 is a PCI Express Gen2 x8 adapter card available from Dolphin providing an easy to use, multi
functional solution.
IXH610 high level specification
PCI Express Gen2 5.0 Gbps per lane signaling
– 40 Gbps total signaling.
PCI Express Gen2 x8 edge connector. The card installs in any PCI Express slot that has a physical x8
or x16 connector.
Compliant with PCI Express Gen1 and Gen3 computers and IO systems, auto detection.
Supports NTB connections to other hosts and transparent connections to IO systems as a transparent
P2P device.
PCI Express Base Specification Rev 2.1
PCI Express External Cabling Specification, Rev. 1.0
One PCI Express Gen2 x8 IPASS Cable connection.
Copper cables tested successfully up to 7 meters
Support for Active Optical Fibers, up to 300 meters.
Low Profile - PCI Express Electromechanical Specification, Rev 2.0
Comes with both low profile and standard profile PCI Express bracket.
PIO and Direct DMA capabilities
Host clock isolation. Automatic support for host running CFC or SSC mode.
Support for hot plugging of the PCI Express cable (NTB mode, SISCI and SuperSockets)
Dual 128 KB EEPROM for boot up configuration data.
Optional Software utility for reprogramming of EEPROM content.
No PCI Express power domain isolation.
Full SuperSockets and SISCI compliance via new PAL. Linux and Windows support.
SMbus support.
Power Consumption: 3,3 Volt - Max 7 Watt.
Operating temperature 0°C to 55°C
Relative Humidity 5% - 95% non-condensing
Weight : 80 Gram
JTAG programming and test
RoHS compliant
Compliant to EN-55022, EN 55024-A1&A2, EN 61000-6-2
CE Mark
Illustration 1: Low profile, single PCI Express Gen2 x8 HBA
