14
|
Dolphin Blue
|
DB 1200T
Filters cleaning instructions for DB 1200T / DB 1225T
This DB 1200T / DB 1225T Shower Control is provided with a stainless steel filter
preventing foreign particles to enter the lines. If the water flow has decreased, this
may be because the filter is clogged. The filter can be cleaned as follows:
1. Shut-off the water
2. Remove the screw cover
3. Unscrew M5x8 and M5x40 screws from the rosette and the thermostatic mixing
handle.
4. Unscrew M5x8 screws from the thermostatic mixing handle base and remove it.
5. Unscrew the covers using the 10mm Allen Key
6. Remove the check valves
7. Remove the filters and wash them under running water
8. Reassemble the filters, the check valves and screw the covers back.
9. Reassemble the thermostatic mixing handle base, rosette and finally the
thermostatic mixing handle.
10. Reconnect and restore the incoming water supply
11. Make sure that there is no water leakage
Care and cleaning of chrome and special finishes
DO NOT
use steel wool or cleansing agents containing alcohol, acid, abrasives, or the
like. Use of any prohibited cleaning or maintenance products or substances could
damage the surface of the shower control. For surface cleaning of shower control us
ONLY soap and water, then wipe dry with clean cloth or towel. When cleaning
bathroom
MAINTENANCE
