DB 1200T
|
Dolphin Blue
|
5
Check contents
Separate all parts from the packaging and check each part with the pack contents
section. Pay attention to the different models variations.
Make sure all parts are accounted for before discarding any packaging material.
If any parts are missing, do not attempt to install your electronic shower control until
you obtain the missing parts
Preparation for installation
Flush water supply lines thoroughly before installing the shower control. Do not allow
dirt, Teflon shower controle or metal particles to enter the water supply. Shut off water
supply.
Important
All plumbing is to be installed in accordance with applicable codes and regulations.
Operation
To operate the Dolphin Blue DB 1200T / DB 1225T controls, simply touch the
designated area at the Piezo shower control. Default flow time is 2 minutes. If you do
not need more water, just touch the designated area again to stop the shower water
flow before the default time has passed.
To change the flow time, proceed to page 9.
PRE INSTALLATION
