Dolphin dolksf1kb, Руководство пользователя

Страница: 3 / 12

DOLKSF1KB
Programming and installation manual
INTRODUCTION
The DOLKSF1KB is a secure and waterproof keypad with two relay outputs. It can work
independently as a stand-alone keypad or it can work as an additional controller to create a high-
security dual keypad system. It also has a 34-bit Wiegand data output from the entry of a
pin/code.
CONNECTION TERMINALS
•
1-2: 12-24V DC (Power Input Terminal)
• Connect 12V-24V AC/DC power. The (-) is the common ground.
•
3-5: OUTPUT (Output Relay 1)
• N.C. (Normally closed)
• Use N.C. for equipment that requires a constant flow of electricity to function
properly. Ex. Magnetic locks, receivers, etc.
•
COM (Common ground)
• N.O. (Normally open)
•
Use N.O. for equipment that requires a temporary surge of electricity to activate.
Ex. Electric door locks, automated gates, etc.
• 6: EG IN ( Egress Input)
• The optional EG. IN terminal is (-) and commonly connected to buttons. Buttons that are
connected to EG. IN will grant access when pressed.
• 7: DU OUT (Duress Output)
•
When a Duress Code is entered, the DU OUT will switch to ground. Ex. It may be used
to turn on a light, camera, or buzzer. It may also be used to trigger an alarm for a
security system.
• 8-9: TAMPER N.C. (Tamper Switch Normally Closed Contact)