Dolby Laboratories CP750, Руководство пользователя

Страница: 35 / 85

Using the Application Tabs to Configure a CP750
Dolby
®
CP750 Digital Cinema Processor Manual 23
Ethernet Settings
By default DHCP is turned off, and entries follow the Dolby ® Digital Cinema private
network address naming convention in which the third octet indicates the auditorium
number:
•
Host Name
: CP750
xxxxx
•
IP Address
: 192.168.
x
.136
•
Subnet Mask
: 255.255.255.128
•
Default Gateway
: 192.168.
x
.129
If you are using the Dolby TMS you need only enter the auditorium number in the third
triad of the
IP Address
and
Default Gateway
fields.
DHCP
We recommend assigning the unit a static IP address, and most installations rely on them.
However, the CP750 can support DHCP.
If you click
Enable
, the
IP Address
,
Subnet Mask,
and
Default Gateway
change to
0.0.0.0
while the unit searches for a server and acquires valid addresses. This search and
acquisition process may take up to 30 seconds.
If no server is found, the displays stay at 0.0.0.0 past 30 seconds.
Figure 4 ‐ 2
Figure 4-2 Network/Time Tab
If you make any changes, the system highlights two action buttons. Click one to either
Discard Changes or Apply Changes .