Dogtek NoBark Static, Руководство пользователя

Страница: 3 / 13

User’s guide
Thank you for choosing this DOGTEK product.
w w w . D O G T E K . c o m
To obtain the best results
The owner’s involvement during the first use of the product
is a key factor in obtaining the best results.
Do not leave your dog unattended with the collar on
until he is accustomed to wearing
it and you are satisfied that it is working correctly. You should ensure that the settings
(bark detection sensitivity / operating mode) are adjusted correctly for your dog .
Closely monitor your pet during the first few days of use.
When your dog is barking, let the collar operate without interference. Any interference on your
part could be taken as a sign of acknowledgment; consequently the barking would become an
effective mean to attract your attention.
As soon as your dog stops barking, congratulate him ( but not excessively ) by petting him,
verbally praising him, or giving him a small treat to encourage his good behavior.
Remember that barking can indicate some behavioral issue. This bark control collar will allow
you to minimize excessive barking.
DescripTion of The proDucT
package conTenTs
- NoBark Static collar fitted with nylon strap and short contact points
- Lithium 3-V CR2 battery
- neon test lamp
- pair of long contact points
- this user’s guide
acTivaTe/DeacTivaTe The collar
Activate: as soon as the battery is in place, the collar is ready for use.
NOTE: the collar remains on standby (unactive) for 2 minutes after inserting the battery.
To fit the battery in the collar, proceed in the following way:
- Unscrew the battery cover using a coin.
- Insert the battery following the polarity indicated on the collar (ref. Diagram 1).
- Retighten the battery cover using a coin. A beep sound is emitted indicating the collar is ready
for use. If you do not hear any beep sound when retightening the battery cover, remove the
battery immediately from its housing. Check the polarity before trying again.
Deactivate: If you wish to turn Off the collar, you should remove the battery from its housing.
To increase the battery life, we recommend you to deactivate the collar if you are not using
it for a long period.
3 4