DOGA BS-5C, Инструкция по эксплуатации

Страница: 25 / 44

60327-04/20 BS-5C color ID bit tray
25
4. USE
4.1 Start and stop the device
To start the device, press the on/off switch so that the “ON” side is lowest. The
display screen comes on.
To stop the device, press the on/off switch so that the “OFF” side is lowest.
The display screen turns off.
4.2 Use in master mode
If all the bits are in their slot, the tool is on standby and locked. Select the bit to
use: the associated program is activated and the assembly tool is unlocked.
When the bit returns to its slot, the assembly tool is re-locked.
If 2 bits are removed from their slot at the same time, the tool is locks.
If the bits are not in their respective slots, the tool is locked.
4.3 Use in slave mode
If all the bits are in their slot, the tool is on standby and locked. If a PLC selects
a program or if selection is done by tool controller, the indicator for the
corresponding slot lights. Pick the bit to use: the program is activated and the
assembly tool is unlocked.
If 2 bits are removed from their slot at the same time, the tool locks.
If the bits are not in their respective slots, the tool is locked.