DOGA BS-5C, Инструкция по эксплуатации

Страница: 18 / 44

60327-04/20 BS-5C color ID bit tray
18
2.3.4 Connection to tightening controller
The bit tray can be connected to the controller in two ways:

Communication using the digital inputs/outputs on the Sub D 25 (blue)
connector.

TCP Modbus communication using an Ethernet cable on the RJ45 socket
(function not enabled - development in progress).
Information
Sub D25 connector description
See annex 1.
With I/O’s 3 operating modes are available:

Direct

Binary

1
Information
To identify the different mode types, refer to the program input /
output correspondence table.
See annex 2.
2.3.5 Connection to the assembly controller
The bit tray is directly compatible with the following controllers:
MDC series, SD / HD series, DPC Touch interface, STANLEY controller
ALPHA V “QBE” Expert and ALPHA V “QBE” Advanced series.

Preferably use a connecting cable dedicated to your controller model and
sold by DOGA.

Refer to annex 3 to configure your equipment connected to the bit tray.