DOGA BS-5C, Инструкция по эксплуатации

Страница: 26 / 44

60327-04/20 BS-5C color ID bit tray
26
5. MAINTENANCE
5.1 Servicing
Color detection can alter over time due to dust or soiling.
Regular color sensor glass cleaning should be carried out using a clean, dry,
non-fluff cloth, in order to keep them clear.
The color sensor glasses are under the bit holders.
color sensor glasses can be accessed by removing the lower part of the bit
tray as described in section 2.3.2.
5.2 Troubleshooting
The device operation has been checked several times in a production situation.
Despite that, if the device has a malfunction, check it using the list below.
Caution
All repair tasks requiring the box to be opened must be carried out by
DOGA or a contractor authorized by DOGA.
Malfunction Action to take
Bit detection does not
work or only works
intermittently on one or
more slots

Re-calibrate the bits
 Check that the colored sleeves are properly
positioned on the bits and are not soiled
 Clean the color sensor glasses
The bit tray will not
switch on
 Check that the mains adapter is plugged in, and
that the plug is connected to the jack connector
 Check the adapter voltage, current and polarity
(24V CC, 1 A, )

Make sure the ON / OFF switch is in
the ON position