Dodge DURANGO 2017, Руководство пользователя

Страница: 219 / 284

3. For the front tire, place the jack on the body flange just behind the front tire. Do not
raise the vehicle until you are sure the jack is fully engaged.
4. For a rear tire, place the jack in the slot on the rear tie-down bracket, just forward of the
rear tire. Do not raise the vehicle until you are sure the jack is fully engaged.
5. Raise the vehicle by turning the jack
screw clockwise. Raise the vehicle just
enough to remove the flat tire.
WARNING!
Raising the vehicle higher than necessary can make the vehicle less stable. It could slip
off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire.
6. Remove the lug nuts and wheel.
7. Install the spare wheel/tire on the vehicle and install the lug nuts with the cone-shaped
end toward the wheel. Lightly tighten the nuts.
Front Jacking Location
Rear Jacking Location
W H A T T O D O I N E M E R G E N C I E S
217