PARKSENSE REAR PARK ASSIST
The ParkSense Rear Park Assist system provides visual and audible indications of the
distance between the rear fascia and a detected obstacle when backing up, e.g. during a
parking maneuver. The vehicle brakes may be automatically applied and released when
performing a reverse parking maneuver if the system detects a possible collision with an
obstacle.
NOTE:
The automatic braking function can be enabled/disabled from the Customer-
Programmable Features section of the Uconnect System.
The four ParkSense sensors, located in the rear fascia/bumper, monitor the area behind
the vehicle that is within the sensors’ field of view.
The sensors can detect obstacles from approximately 12 inches (30 cm) up to 79 inches
(200 cm) from the rear bumper while the vehicle is in REVERSE, a warning will appear in
the instrument cluster display and a chime will sound (when Sound and Display is
selected from the Customer Programmable Features section of the Uconnect System
screen). As the vehicle moves closer to the object, the chime rate will change from single
1/2 second tone, to slow, to fast, to continuous.
Cleaning The ParkSense Sensors
If “PARKSENSE UNAVAILABLE WIPE REAR SENSORS" appears in the instrument
cluster display, clean the ParkSense sensors with water, car wash soap and a soft cloth. Do
not use rough or hard cloths. Do not scratch or poke the sensors. Otherwise, you could
damage the sensors.
PARKVIEW REAR BACK-UP CAMERA
You can see an on-screen image of the rear of your vehicle whenever the gear selector is
put into REVERSE. The ParkView Rear Back-Up Camera image will be displayed on the
radio display screen, located on the center stack of the instrument panel.
Rear Camera — Viewing At Speed
When the vehicle is in park, neutral or drive, the Rear View Camera can be activated with
the “Rear View Camera” button in the Controls menu. This feature allows the driver to
monitor the area directly behind the vehicle (or trailer, if equipped) for up to ten seconds
while at speed. If the vehicle speed remains below 8 mph (13 km/h), the Rear View
Camera image will be displayed continuously until deactivated via the “X” button on the
touchscreen.
If the radio display screen appears foggy, clean the camera lens located on the liftgate.
O P E R A T I N G Y O U R V E H I C L E
103
Содержание DURANGO 2017
Страница 11: ...3 Temperature Gauge 4 Fuel Gauge See page 207 for Instrument Cluster Indicator Lights CONTROLS AT A GLANCE 9...
Страница 218: ...2 Assemble the jack and jacking tools Jack and Tools Assembled Jacking Locations WHAT TO DO IN EMERGENCIES 216...
Страница 281: ...NOTES 279...
Страница 282: ...NOTES 280...