BLIND SPOT MONITORING
The Blind Spot Monitoring (BSM) system uses two radar sensors, located inside the rear
bumper fascia, to detect highway licensable vehicles (automobiles, trucks, motorcycles
etc.) that enter the blind spot zones from the rear/front/side of the vehicle.
The BSM detection zone covers approximately one lane width on both sides of the vehicle
12 ft (3.8 m). The zone length starts at the outside rear view mirror and extends
approximately 10 ft (3 m) beyond the rear bumper of the vehicle. The BSM system
monitors the detection zones on both sides of the vehicle when the vehicle speed reaches
approximately 6 mph (10 km/h) or higher and will alert the driver of vehicles in these
areas.
When the vehicle is started, the BSM warn-
ing light will momentarily illuminate in both
outside rear view mirrors to let the driver
know that the system is operational. The
BSM system sensors operate when the ve-
hicle is in any forward gear or REVERSE,
and enters standby mode when the vehicle
is in PARK.
The BSM warning light, located in the out-
side mirrors, will illuminate if a vehicle
moves into a blind spot zone.
The BSM system can also be configured to
sound an audible (chime) alert and mute
the radio to notify you of objects that have
entered the detection zones.
Rear Cross Path (RCP)
The Rear Cross Path (RCP) feature is in-
tended to aid the driver when backing out of
parking spaces where the vision of oncom-
ing vehicles may be blocked. Proceed
slowly and cautiously out of the parking
space until the rear end of the vehicle is
exposed. The RCP system will then have a
clear view of the cross traffic and if an oncoming vehicle is detected, will alert the driver.
When RCP is on and the vehicle is in REVERSE, the driver is alerted using both the visual
and audible alarms, including reducing the radio volume.
Refer to “Blind Spot Monitoring” in “Understanding The Features Of Your Vehicle” in your
Owner’s Manual on www.dodge.com/en/owners/manuals for further details.
Rear Detection Zones
Blind Spot Mirror
O P E R A T I N G Y O U R V E H I C L E
105
Содержание DURANGO 2017
Страница 11: ...3 Temperature Gauge 4 Fuel Gauge See page 207 for Instrument Cluster Indicator Lights CONTROLS AT A GLANCE 9...
Страница 218: ...2 Assemble the jack and jacking tools Jack and Tools Assembled Jacking Locations WHAT TO DO IN EMERGENCIES 216...
Страница 281: ...NOTES 279...
Страница 282: ...NOTES 280...