Dodge 2015 Charger, Руководство по эксплуатации

Страница: 170 / 712

•
Blind Spot Alert
When this feature is selected, the Blind Spot Alert
feature Provides alerts, visual and/or audible, to
indicate objects in your blind spot. The Blind Spot
Alert feature can be activated in “Lights” mode.
When this mode is selected, the Blind Spot Monitor
(BSM) system is activated and will only show a
visual alert in the exterior mirrors. When “Lights &
Chime” mode is activated, the Blind Spot Monitor
(BSM) will show a visual alert in the exterior mirrors
as well as an audible alert when the turn signal is
on. When “Off” is selected, the Blind Spot Monitor
(BSM) system is deactivated. To change the Blind
Spot Alert status, press the “Off,” “Lights” or “Lights
& Chime” button on the touchscreen. Then press
the back arrow button on the touchscreen.
NOTE:
If your vehicle has experienced any damage
in the area where the sensor is located, even
if the fascia is not damaged, the sensor may
have become misaligned. Take your vehicle
to an authorized dealer to verify sensor
alignment. Having a sensor that is mis-
aligned will result in the BSM not operating
to specification.
•
ParkView® Backup Camera Active
Guidelines
Your vehicle may be equipped with the
ParkView® Rear Back Up Camera Active
Guidelines that allows you to see active guide-
lines over the ParkView Back up camera display
whenever the shift lever is put into REVERSE.
The image will be displayed on the radio touch-
screen display along with a caution note to
“check entire surroundings” across the top of
the screen. After five seconds, this note will
disappear. To make your selection, press the
“ParkView Backup Camera Active Guidelines”
button on the touchscreen, until a check-mark
appears next to setting, indicating that the set-
ting had been selected. Press the back arrow
button on the touchscreen to return to the
previous menu.
•
ParkView® Backup Camera Delay
When the vehicle is shifted out of REVERSE
(with camera delay turned OFF), the rear cam-
era mode is exited and the navigation or audio
screen appears again. When the vehicle is
shifted out of REVERSE (with camera delay
turned ON), the rear view image with dynamic
grid lines will be displayed for up to 10 seconds
after shifting out of “REVERSE” unless the
forward
vehicle speed exceeds 8 mph
(12 km/h), the transmission is shifted into
“PARK” or the ignition is switched to the OFF
position. To set the ParkView® Backup Camera
Delay press the “Controls” button on the touch-
screen, the “settings” button on the touch-
screen, then the “Safety & Driving Assistance”
button on the touchscreen. Press the “Parkview
Backup Camera Delay” button on the touch-
screen to turn the ParkView® Delay ON or OFF.
•
Rain Sensing Auto Wipers
When this feature is selected, the system will
automatically activate the windshield wipers if it
senses moisture on the windshield. To make
your selection, press the “Rain Sensing Auto
Wipers” button on the touchscreen, until a
check-mark appears next to setting, indicating
that the setting had been selected. Press the
back arrow button on the touchscreen to return
to the previous menu.
167