Dodge 2015 Charger, Руководство по эксплуатации

Страница: 160 / 712

•
ParkView® Backup Camera Active
Guidelines
Your vehicle may be equipped with the
ParkView® Rear Back Up Camera Active
Guidelines that allows you to see active guide-
lines over the ParkView Back up camera display
whenever the shift lever/gear selector is put into
REVERSE. The image will be displayed on the
radio touchscreen display along with a caution
note to “check entire surroundings” across the
top of the screen. After five seconds, this note
will disappear. To enable or disable, press the
“ParkView® Backup Camera Active Guidelines”
button on the touchscreen, and select “On” or
“Off.” Press the back arrow/Done button on the
touchscreen to return to the previous menu.
•
ParkView® Backup Camera Delay
When the vehicle is shifted out of REVERSE
(with camera delay turned OFF), the rear cam-
era mode is exited and the navigation or audio
screen appears again. When the vehicle is
shifted out of REVERSE (with camera delay
turned ON), the rear view image with dynamic
grid lines will be displayed for up to 10 seconds
after shifting out of “REVERSE” unless the
forward vehicle speed exceeds 8 mph
(12 km/h), the transmission is shifted into PARK
or the ignition is switched to the OFF position.
To set the ParkView® Backup Camera Delay
press the “Controls” button on the touchscreen,
the “settings” button on the touchscreen, then
the “Safety & Assistance” button on the touch-
screen. Press the “Parkview Backup camera
Delay” button on the touchscreen and select
from “ON” or “OFF.”
•
Rain Sensing Auto Wipers
When this feature is selected, the system will
automatically activate the windshield wipers if it
senses moisture on the windshield. To enable or
disable, press the “Rain Sensing” button on the
touchscreen, and select “On” or “Off.” Press the
back arrow/Done button on the touchscreen to
return to the previous menu.
•
Hill Start Assist — If Equipped
When this feature is selected, the Hill Start
Assist (HSA) system is active. Refer to “Elec-
tronic Brake Control System” in “Starting And
Operating” for system function and operating
information. To enable or disable, press the “Hill
Start Assist” button on the touchscreen, and
select “On” or “Off.” Press the back arrow/Done
button on the touchscreen to return to the
previous menu.
Lights
After pressing the “Lights” button on the touch-
screen, the following settings will be available:
•
Headlight Off Delay
When this feature is selected, it allows the
adjustment of the amount of time the headlights
remain on after the engine is shut off. To change
the Headlight Off Delay setting, press the
“Headlight Off Delay” button on the touchscreen
and choose either “0,” “30,” “60,” or “90” buttons
on the touchscreen to select your desired time
interval. Press the back arrow/Done button on
the touchscreen to return to the previous menu.
•
Headlight Illumination On Approach
When this feature is selected, it allows the
adjustment of the amount of time the headlights
remain on when the doors are unlocked with the
Remote Keyless Entry (RKE) transmitter. To
change the Illuminated Approach status, press
the “Illuminated Approach” button on the touch-
157