Dodge 2012 Grand Caravan Скачать руководство пользователя страница 381

Страница: 381 / 695

•

Turning it clockwise (forward) by one click, while
playing a track, skips to the next track or press the VR
button and say

⬙

Next Track.

⬙

•

Turning it counterclockwise (backward) by one click,
will jump to the previous track in the list or press the
VR button and say

⬙

Previous Track.

⬙

•

Jump backward in the current track by pressing and
holding the <<

button. Holding the <<

button

long enough will jump to the beginning of the current
track.

•

Jump forward in the current track by pressing and
holding the

>> button.

•

A single press backward <<

or forward

>> will

jump backward or forward respectively, for five sec-
onds.

•

Use the <<

SEEK

and

SEEK

>> buttons to jump to the

previous or next track. Pressing the

SEEK

>> button

during play mode will jump to the next track in the
list, or press the VR button and say

⬙

Next or Previous

Track.

⬙

•

While a track is playing, press the

INFO

button to see

the associated metadata (artist, track title, album, etc.)
for that track. Pressing the

INFO

button again jumps

to the next screen of data for that track. Once all
screens have been viewed, the last

INFO

button press

will go back to the play mode screen on the radio.

•

Pressing the

REPEAT

button will change the audio

device mode to repeat the current playing track or
press the VR button and say

⬙

Repeat ON

⬙

Repeat

Off.

⬙

UNDERSTANDING YOUR INSTRUMENT PANEL

379

Содержание 2012 Grand Caravan
























































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2012 Grand Caravan

Отзывы:

Похожие инструкции для 2012 Grand Caravan

Бренды по названию

Популярные бренды

Dodge 2012 Grand Caravan, Руководство пользователя

Результаты поиска

Содержание 2012 Grand Caravan

Отзывы:

Похожие инструкции для 2012 Grand Caravan

Бренды по названию

Популярные бренды