page 2
Fig. 3 shows the version with a "IV" unit that
connects to internal combustion motors (ideally
diesel), thus taking advantage of the low number of
revolutions. This version features an oil cooling
system contained in the gearbox.
fig. 3
1
1) Suction cone
2) Cap for introducing priming fluid
3) Conveyor
4) Pump body
5) PTO box
6) Oil filler, level and breather cap (AFI units
with shaft)
7) Electric motor
8) Cooling system for AFI pumps with "IV"
unit.
9) “IV” gearbox
10) Chopper blade
11) Vacuum pump
12) Vacuum pump oil tank
13) Delivery
9
2. MACHINE LOADING AND UNLOADING
fig. 4
2
8
NOTE
:
If manoeuvres are performed using a forklift, do not knock the easily breakable
parts, and move very slowly.
N.B.: the carrying capacity of the sling must be at least seven times the total weight of
the machine (if it is made from textile fibre).
NOTE:
in all cases, the machine must not be lifted by gripping the weakest parts of the
structure (delivery pipes, etc.).
NOTE:
before lifting, ensure that the structure is balanced
NOTE:
do not make sudden manoeuvres.
