3. GENERAL WARNINGS
1) Check that no component has been damaged during transportation. If damage has
occurred, contact your dealer immediately.
2) The power connection must be carried out in accordance with the DODA instructions,
by qualified personnel (by connecting the cables of the electric motor to the power or
the pump to the tractor by Cardan shaft). DODA is in no way responsible for the
electrical connections (please follow the instructions on the motor plate and the
sticker which indicates the direction of rotation).
3) Before starting the machine, check that the rotating parts of the transmission are
adequately protected as required by their manufacturer.
4) The protection of the rotating parts not supplied with the machine must be performed
by the operator based upon existing provisions of law.
5) DODA accepts no responsibility for changes that alter the characteristics of the
purchased machine.
6) DODA machines may not be installed on structures that do not comply with EC
safety requirements.
7) Before operating the machine, it is essential to read the instructions contained in the
Use and Maintenance Booklet
.
In particular, ensure that you have fully understood
how the machine operates.
8) The machine was designed and constructed to treat water and sewage, but not
chemical products. Treating the latter substances may cause permanent damage.
9) Check that the length of the machine is appropriate to the depth of the tank.
10) With regard to machines with oil bath transmission, the transmission pipe and the
gear units, if present, should be filled with oil.
11) During assembly, ensure that the rubber parts of the machine do not come into
contact with oil, grease or oil derivatives.
12) The pump must never be run under no-load operating conditions (see
"OPERATION").
page 4
