To remove the rotor from the shaft, screw two
bolts into the holes "A" shown in the figure,
until it is completely removed.
When reassembling the counter-rotor "B",
position it so that the widest section
corresponds to the delivery line, as specified in
fig. 16.
When assembly is complete, the counter-rotor
should be barely touching the upper part of the
rotor blades.
fig. 16
fig. 15
Follow the numerical sequence shown in figure 15 to disassemble the pump body, starting
with the counter-blades marked as number "1".
page 22
12. GUIDELINES FOR PUMP BODY
A
B
